Oak Bluffs, MA old classifieds archive and funnies > Boats
> 8-port remote input/output switch~web control w/timer
8-port remote input/output switch~web control w/timer
8-port Remote Input/Output Sensor Controller Switch ~ Web Control with Timer/Scheduler
No longer need to waste human time to send someone to the site for a physical check on the status or for power reset or system re-boot. You can get it all done from your web browser through internet ! Save time and money by eliminating service calls and reducing downtime to a minimum.
You can easily check the current device status and control equipments remotely from internet. It features an embedded web server, security code identification and hardware reset function, polar protection, and LED indicators for switch-working status. This system can also be integrated with Home or Office security, personal entertainment, or industrial field applications with ease through its RS-232 port.
The main unit will interface with the 8-port sensor input module and the 8-port controller output module boxes at the same time to achieve device management via web interface. This kit can also be flexibly applied to home automation, industrial, security systems for central management.
The input module provides total 8 pairs of inputs for sensors of different electrical equipments like smoke detector, temperature/humidity sensor, water sensor, security reed switch sensor, motion detector, density detector, infrared detector or valve like high-temperature / high-pressure / gas / automatic control valve.
* 4 sets of voltage input contacts. Use voltage sensors to detect any change in devices.
* 4 sets of resistance/short circuit input contacts. By reading a magnetic reed switch or any non-voltage sensor to detect if any change or movement detected. For instance: entrance guard, door, windows, safe box, drawer and other security devices.
* If the resistance difference between the two contacts in one set is within 200 ohm, this channel will be shown as "ON" on the web control panel.
* If the resistance difference between the two contacts in one set is greater than 500 ohm, this channel will be displayed as "OFF" on the web control panel.
The output module provides 8 sets of outputs at the same time to control the operation of the equipments..
* Outlet 1 to 4 are switches with default "Close" circuit for contacts. When the outlet is "ON", the corresponding LED lights up and the circuit between the two connects is then switched off. When the outlet is "OFF", the corresponding LED lights off, the circuit between the two contacts is then switched on.
* Outlet 5 to 8 are switches with default "On" circuit for contacts. When the outlet is "ON", the corresponding LED lights up and the circuit between the two connects is then switched on. When the outlet is "OFF", the corresponding LED lights off, the circuit between the two contacts is then switched off.
Easy Web Control & Configuration
No special software required. Works with any form of web browser. Easy Web Administration for all configuration.
Intelligent Power Control with Timer/Scheduler
Configurable timer/scheduler options allow you to schedule device powering off and on with programming. And these schedules can be reprogrammed at any stage (over the Internet or local Ethernet). You can now schedule time of day activities like reboot or shutdown every night.
Security and Co-Location Features
This network sensor/controller switch is password protected for security. Address-specific IP security masks prevent unauthorized sources from accessing the control menu through the network. This power switch provides two levels of operational passwords; the system administrator level, which allows access to all configuration and switching functions, and the user level which only allows switching of assigned plugs. The user-level security features are ideal for co-location applications,where multiple users may be allowed plug-specific access to the power switch.
* Save time and money by eliminating service calls and reducing downtime to a minimum.
* Easy installation, setup and support with online upgrade.
* Embedded web server. No need of PC operation. Use Ethernet or Internet (LAN / WAN).
* Controls devices remotely and check the device status via the Internet anywhere in the world using a browser.
* Flexible use in any combination to monitor temperature, humidity, water leakage, Airflow including long term graphing, security, detect AC Power Line Voltage, Measure DC Voltage, control relays, and many more.
* Multi-user password and access security administration with 2-layers username & password protection.
* Standard GPIO Input/Output interface ports allow for 8 digital Inputs and 8 digital outputs to alarm, external trigger, industrial equipment, etc.
* Digital inputs and direct control relay outputs
* 8 sets of sensor inputs - 4 sets of voltage inputs + 4 sets of resistance inputs.
* 8 set of Controller outputs
Network protocols supported: HTTP, DHCP, DDNS, Virtual and Dynamic IP.
* Support NTP (Network Time Protocol) to synchronize the time of the power controller box to the internet current time.
Security code identification and hardware reset function.
Individual LED indicates switch-working status.
Digital inputs provide de-bouncing function.
Support all different kinds of sensors/triggers like smoke detector, temperature/humidity sensor, water sensor, security reed switch sensor, motion detector, density detector, infrared detector or valve like high-temperature / high-pressure / gas / automatic control valve.
* Factory Defaults: In the event that the password is forgotten, or IP address has been programmed to an invalid number, administrator can always reset the power switch back to its original factory defaults and/or set its IP address.
* Set up individual power outlet default: When regaining power, the power box can restore each outlet to the default status settings.
* Security access: dual-password setup for access security to prevent unauthorized sources from accessing the control menu through the network.
* Supports RS-232 serial port communication for external control terminal, modem dial up or integration with other systems.
* Dry & wet contacts switch.
Embedded "WATCH DOG" function support.
Support GPRS setting by for online Cell phone ( item limit).
Support SMTP - send IP address by E-mail as log in and send e-mail as detecting sensor trigger.
Safe, durable, non-electric leakage and anti-farmable design.
Polar protection will even connect contrary port .
Remote Input/Output Controller Box (Main Unit):
* 15-pin D-Sub output connector for connection with output module box.
* 15-pin D-Sub input connector for connection with input module box.
* Dimensions: 1 x 4.75 x 3.25-inches (H x W x D)
* 15-pin D-Sub connector for connecting with controller box.
* 240 VAC, 60 VDC maximum switching voltage
* 12 A, AC/DC maximum switching current
* 10 ms maximum operating time
* Dimensions: 1 x 4.75 x 3.25-inches (H x W x D)
* 15-pin D-Sub connector for connecting with controller box.
* Channel # 1, # 2, # 3, # 4: Voltage inputs with "ON" status: 4V ~ 24V, "OFF" status: 0V ~ 3V
* Channel # 5, # 6, # 7, # 8: Resistance input with ON status: 200 ohm ~ 0 ohm, OFF status: 500 ohm ~ infinity resistance input
* Dimensions: 1 x 4.75 x 3.25-inches (H x W x D)
: can be associated with any kind of electrical equipments, no matter household appliances or security equipment. It can manage the power supply through the web page; make it be safer for the security equipment and more convenience for digital control at the far end.
Bank, financial security system, jewels, casino, cash register in supermarket, park, traffic control, military equipment and airport.
Door & Windows, Safety Case, Drawer, Light and Home Appliance.
* AC adapter (100-240V, 47/63Hz, 0.5A, 5V, 1A)
* GPIO connector plug-ins x 16