Oak Bluffs, MA old classifieds archive and funnies > Boats
> 90 led lighting illuminator array pcb, multi-purpose
90 led lighting illuminator array pcb, multi-purpose
LED solid-state lighting is the future of lighting.
You are purchasing a brand-new Made-in-Canada Onstate Technologies LED multi-purpose illuminator array PCB to make your own LED light array.
All Onstate products are designed and manufactured in Canada. The PCB is a high-quality and high-performance PCB designed and manufactured to provide maximum performance for LEDs. Unlike other brands that have limited functions, Onstate units are fully adjustable to provide LED protection and control. The assembled board is suitable to drive high power Luxeon or other LEDs. Visit /Tech-specs/tech-specs.htm for more information on wiring and assembly. We will provide technical support for your application.
The LLIA90 is a high-quality and high-performance multi-purpose LED illuminator array. It has a built-in regulator and a photocell control circuit for automatic LED array on/off during the day and night. The LED array has 90 LEDs in 3 banks of 3-series and 10-parallel pattern. It can also be externally triggered on/off for multi-coloured illumination using red, green and blue arrays. The LEDs are current regulated to maintain best performance and to prevent thermal runaway from excess heat and voltage. The LLIA90 PCB is designed for high-performance LED illumination applications using thick copper pads on a double-sided and through-hole plated design for high reliability and optimum LED heatsinking and performance. The solder pads are gold immersion coated for high soldering reliability and for RoHS compliance. The multi-purpose design features adjustable current control, high-efficiency switch-mode regulation, external trigger and auto photocell-triggered LED illumination for décor lighting or area lighting. The LED controller is also configurable to power other star-type, high-power star LEDs such as the Cree, Luxeon or K2 type.
- 90 LED illumination array for 5mm LEDs
- 3 banks at 3-series by 10-parallel pattern or 3x30 pattern
- Adjustable current regulator
- Efficient, integrated switch-mode design
- 7-30VDC input, 1A output operation
- External or automatic photocell on/off control
- High performance design for LED applications
- Large copper pads for heat dissipation
- Maximise and maintains peak LED performance
- Efficient and low cost lighting
- Portable lighting, architectural lighting
- Décor lighting, area lighting
- Strobe or special effect lighting
- Replace light bulb lighting, track lighting
- Configurable for external LED/electronic uses
PCB-LLIA90: Illuminator array PCB, no parts. Partially assembled kits available.
Please contact us at on-****@onstatetech.com for more quantities or questions on your application. A complete panel has 8 PCBs.
/Tech-specs/tech LLIA90 illuminator array 90 rev5.pdf
Copy and paste the following link if the above does not work.
http:// /Tech-specs/tech%20LLIA90%20illuminator%20array%2090%20rev5.pdf
All electronic parts to assemble the unit are available from Digi-Key.
see for more information and more power products.
Note: Do not use in wet locations. Do not exceed the specifications of the unit.
Silkscreen: White on component side
Dimension: 3.4†x 2.3†rectangular
Soldering: Through-hole plated
LED: 5mm type, 90 total. 3 banks (3s10p)
Maximum current: 1A through LED driver
Maximum power: 10W total with appropriate heatsinking
