Oak Bluffs, MA old classifieds archive and funnies   >   By Year   >   2001   >   30 hp cnc rotary phase converter-- des-co industries

30 hp cnc rotary phase converter-- des-co industries


The Industrial Phase Converter Company
Manufacturing 3-Phase Power for 37 years
Des-Co Phase Converters are designed with the Power to operate Hard-Starting Equipment and are able to handle the varying loads of CNC Machinery, even in the instant-reverse and speed change modes-without getting an error reading and shutting you down-Call for exact Phase Converter Sizing on your Equipment
You can pay More elsewhere-but that doesn't mean you get More
This is a DES-Co Industries Brand New CNC Rotary Phase Converter, which comes complete with the phase converter panel using Buss-Bar connections and the rotary generator motor which is designed for CNC and EDM operation.
This is a heavy duty cast iron rotary Phase Converter which will provide a powerful three phase output of 2-5% balanced output for CNC applications. Continuous Duty and very quiet operation.
Start-Stop Pushbuttons allow control of phase converter-and in case of power outage, the converter will not auto re-start unless you over-ride this feature.
Totally Enclosed Fan Cooled Rotary Generator motor-Not an open style rotor motor, NOT a rolled steel rotary motor but a heavy duty cast iron frame designed for industrial duty and locations. Read about why this is important and the specifications of different rotary motors at /specifications
BUSS-BAR CONNECTIONS ARE PROVIDED IN ALL OUR CONVERTER PANELS FOR EASE OF CONNECTIONS AND TO ASSURE THAT ALL CONNECTIONS ARE TIGHT AND TROUBLE FREE. 230 VOLTS SINGLE PHASE IN AND THREE WIRES OUT FOR THREE PHASE. ITS AS SIMPLE AS THAT TO HOOK UP.
Designed to generate at a maximum three phase output-lower in-rush starting currents. 2-5% Constant Balanced output for CNC Equipment. Call first with the specifications of your equipment for proper sizing to match your equipment.
Heavy duty oil filled capacitors to insure a constant three phase balanced output at maximum load and lower current draw at idle
. An important consideration in Phase Converters is this:
We insure that our Phase Converters have enough output capacitors to handle the current draw on the induced phase that the converter generates. Balanced voltage output does not mean the converter will handle the current draw of your equipment, it only means that enough capacitors were installed to balance the voltage, but the induced output leg will not have enough capacitance to handle the load. You can balance a converter using only a couple of capacitors, but doing this is like trying to start a large diesel truck with a lawnmower battery. The voltage may be there, but there is not enough current to do the job from the battery.
Des-Co has designed each converter to be able to handle the amperage draw on the induced phase, not with only just balancing the voltage output but for maximum amperage output also. For example, a 20 Hp Des-Co rotary phase converter has 16 - 18 capacitors installed for the maximum output and for proper operation.
Simple to install-Simple to hook-up. Buss-Bars are provided for ease of connections, with lots of room to make the connections. No wire nuts, no taping. Single phase input-Three phase output.
Des-Co Rotary Phase Converters are sized to operate up to three times the rated hp of the converter. For example a 15 Hp Rotary Phase Converter can operate up to a total of 45 hp depending on the load conditions of the equipment. Always Call first for assurance of proper sizing.
Des-Co Industries gurantees the Phase Converter will operate your equipment if sized properly. A toll-free number 1-(***)-549-6008 is available, it takes only a minute to get assurance that our Phase Converters are compatible with your equipment.
The Industrial Phase Converter Company
37 years of Manufacturing Three Phase Power-



30 hp cnc rotary phase converter-- des-co industries 30 hp cnc rotary phase converter-- des-co industries