Oak Bluffs, MA old classifieds archive and funnies > By Year
> 2002
> Dytran 1051V5/1051V dynamic force sensor
Dytran 1051V5/1051V dynamic force sensor
Dytran 1051V5 Dynamic Force Sensor
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from Dytran and may vary slightly due to upgrades, options or revisions this unit may or may not have.
Link to Datasheet: Dytran 1051V5 Dynamic Force Sensor (PDF)
* 1/4-28 tapped hole top surface
Dynamic force sensors are ideal for driving point measurements in modal analysis applications as well as many other dynamic force applications that requires ultra fast rise time and high natural frequency.
Specifications per Model 1051V5:
Compression Range: 1000 Lbs.
Maximum Tension [1]: 500 Lbs.
Max. Mounted Resonant Frequency, Unloaded: 75 kHz
F.S. Output Voltage, Nom.: 5 Volts
Max Shock, Unloaded: 10,000 G's
Max. Vibration, Unloaded: +/- 5,000 G's
Coefficient of Thermal Sensitivity: .03 %/°F
Temperature Range: -100 to +250 °F
Supply Current / Voltage Range [3]: 2 to 20 / +18 to +30 mA / VDC
Mounting Provision: 1/4-28 x .175 Deep Tapped Hole In Top and Bottom Surfaces
Electrical Connector, Radial: 10-32 Coaxial
[1] Absolute maximum tension. Do not exceed in any case!
[2] Percent of full scale or of any lesser range, zero based best fit straight line method.
[3] Power these instruments only with constant current type power units. Do not connect to a source of voltage without current limiting. This will destroy the integral IC amplifier.
