Oak Bluffs, MA old classifieds archive and funnies > By Year
> 2005
> Contracer cb-41 profile scanner measuring system
Contracer cb-41 profile scanner measuring system
Contracer CB-41 Profile Scanner Measuring System
Contracer CB-41 Profile Scanner Measuring System
The following information was taken off various websites:
The profile scanner is very effective in capturing the geometry of smaller parts that can’t be checked with an optical comparator. For sophisticated contour analysis, the Contracer captures exact profile details.
Typical jobs used on the Contracer are profile inspection for small gear teeth, internal threads, flat serrations, turbine blade root design, face threads, fine details in small molds, and even golf ball dimples.
* Provides completely synchronized recording. Completely synchronized recording is possible in chart rest operation as well as in chart flow operation.
* Free from arc error in recording contour. Due to the linear motion mechanism for stylus up/down travel, it becomes possible to obtain arc error-free recording on rest chart as well as flowing chart.
* Possible to measure even on the sharp inclination Possible to measure the
workpiece in backward or in forward direction of stylus traverse over a sharp inclination.
* Possible to measure top and bottom surface. The stylus is reversible for measuring bottom surface as well as top surface with no difference in performance.
* Safety device is included for protecting the stylus and other mechanism Safety device built-in the drive mechanism works to stop the stylus feeding when an excessive force is applied on the stylus/measuring arm.
* Possible to set the Z-axis travel range for the stylus Stylus up/down travel range is possible to limit in conformity with the part feature to be measured, thereby avoiding damage due to the interference between the workpiece and the stylus/measuring arm
Measuring Unit, Control Unit & Recorder
Measuring Range: X-Axis: 100mm, Y-Axis: 40mm
Power Drive Unit: Elevation Range: 300mm, Inclination range: 10degrees
Magnification Accuracy: X-Axis: 0.6mm/Full Scale
Power Supply: 240volt, 50/60 Hz
Recorder: Operating on 110/120volt, set to 115volt
Comes with Operation manual!
Freight costs to be quoted at time of sale from zip code 06787.All freight costs to be paid by the purchaser.Should you have questions, please contact Joe at (***)-484-4449 or email ****@globalmachinebrokers.com
