Oak Bluffs, MA old classifieds archive and funnies > By Year
> 2005
> Eng. plc #1,2,&3 rs logix 5000 & #1,2&3 rslogix 500
Eng. plc #1,2,&3 rs logix 5000 & #1,2&3 rslogix 500
(6) DVD's and (6) CD's Both Basic PLC courses in ONE!!
You get (6) DVD's and (6) CD's. This is every Basic course offered all in one!!!!!!
************************************************************************
Engineering RS Logix 5000 "Controllogix PLC system" PLC Training Course #1, 2 and 3:
Allen Bradley sells a similar PLC#1,2,&3 course for $1200.00; do not waste your time; get more than AB is selling for a fraction of the price; and the best part is you can watch again when you need to review.
Gain a competive edge on your competition; knowing this material will help you get that job; keep that job; and earn top dollar......
If you have not already, you will have to deal with programming or programmers. These training DVD's will prepare you for this inevitable event.
Sit back and enjoy. Then work through the sample problems I have prepared for you. If you follow the course and do the work you will be adequately prepared.
This DVD is an excellent training tool and reference guide. I have been an engineer for the past 16 years and find these videos to be extremely useful and practical. You will find that this is without a doubt the most valuable information you have in your library. And the best part is it is very inexpensive. This is similar course material used by Allen Bradley, and they charge $1200 for the equivalent of PLC Courses #1 thru #3.
A heavier emphasis is put into the engineering aspect of programming. The information you learn from this video will be applicable to the EIT/FE engineering exam (Digital Computing Section). This course will adequately prepare you in the Numbering Systems, Logic Gates, Combinational Logic, Sequential Logic, and Operating system sections. PLC Courses #1 thu #3 will complete the EIT/FE review of the Digital Computing Section of the exam.
PLC RS logix 5000 Course #1, (1) CD and (1) DVD.
***************************************************
PLC Course #1: Basic PLC Course Using RS Logix 5000.
4. Applying Programming Strategies and Techniques using RS Logix 5000.
5. Getting Started with RS Logix 5000
6. Documenting and Searching Ladder Logix using RS Logix 5000 Program.
7. Programming Timer and Counter Instruction using RS Logix 5000.
8. Drafting Ladder Logic for an RS Logix 5000 Project.
Includes: (1) DVD of the course above, and (1) CD which includes the PLC manuals for this lesson.
*****************************************************
PLC Course #2: Basic PLC Course Using RS Logix 5000.
1. Homework review from Course #1.
2. Combinational Logic and examples using RS Logix 5000.
3. Sequential Logic and examples using RS Logix 5000..
4. State Diagrams and examples using RS Logix 5000.
5. Integrated Practice - Programming Basic Instructions using RS Logix 5000.
6. Programming Program Control Instructions using RS Logix 5000.
7. Programming Compare Programming Instructions using RS Logix 5000.
8. Configuring the analog cards, and setting up the built in alarm features.
9. Drafting Ladder Logic for an RS Logix 5000 Project.
Includes: (1) DVD of the course above, and (1) CD which includes the PLC manuals for this lesson.
*****************************************************
PLC Course #3: Basic PLC Course Using RS Logix 5000.
1. Homework review from Course #2.
2. JK Flip Flops and examples using RS Logix 5000.
3. T-Flip Flops and examples using RS Logix 5000..
4. Karnaugh (K-Maps) and examples using RS Logix 5000.
5. Integrated Practice - Programming Basic Instructions using RS Logix 5000.
6. Monitoring and Editing Tags using RS Logix 5000.
7. Forcing and Toggle Bits using RS Logix 5000.
8. Troubleshooting Controller Problems using RS Logix 5000.
9. Configuring the analog cards, setting up a PID instruction.
10. ISA Symbols and examples using RS Logix 5000.
11. Drafting Ladder Logic for an RS Logix 5000 Project.
Includes: (1) DVD of the course above, and (1) CD which includes the PLC manuals for this lesson.
*****************************************************
PLC RS Logix 500 Course #1, #2, and #3, (3) CD's and (3) DVD's.
***************************************************
PLC Course #1: Basic PLC Course Using RS Logix 500.
2. The numbering systems: binary, octal, and hexidecimal.
4. Identifying PLC system components, selecting your system.
5. Getting Started with RS Logix 500
6. Downloading, Going on line, and saving a RS Logix 500 Program.
7. Determining Addresses and assigning Comments and Symbols using RS Logix 500.
8. Drafting Ladder Logic for an RS Logix 500 Project.
Includes: (1) DVD of the course above, and (1) CD which includes the PLC manuals for this lesson.
***************************************************
PLC Course #2: Basic PLC Course Using RS Logix 500.
This course assumes you have completed PLC Course #1.
1. Quick review of the topics covered in PLC Course #1, detailed solutions are given for the homework given in PLC#1.
2. 1's and 2's complement notation
8. Downloading and running a RS Logix 500 simulator
9. Selecting Bit Instructions
10. Entering, Editing, and Verifying Ladder logic
11. Determining Program Flow and Creating Subroutines
12. Selecting and Programming Timer Instructions
13. Selecting and Programming Counter Instructions
14. Entering and Searching for Documentation
Includes: (1) DVD of the course above, and (1) CD which includes the PLC manuals for this lesson.
************************************************************************
PLC Course #3: Basic PLC Course Using RS Logix 500.
This course assumes you have completed PLC Course #1 and #2.
1. Quick review of the topics covered in PLC Course #2, detailed solutions are given for the homework given in PLC#2.
2. Sequential Logic and Completion of Flip Flop Circuits
3. Karnaugh Maps 3, and 4 variable k-maps
4. Karnaugh Maps 5, and 6 variable k-maps
6. Reduction of State Tables
7. Introduction to State Machine Design
8. Organizing the Data Table
9. Selecting and programming Math Instructions
11. Selecting and Programming Comparison Instructions
12. Configuring and Previewing a Project Printout
Includes: (1) DVD of the course above, and (1) CD which includes the PLC manuals for this lesson.
*****************************************************
(6) DVD's of the course above, completely explained in an easy to understand format.
(6) CD's which includes the PLC manuals for this lesson.
(1) Fully Functioning RS Logix 5000 90 day version and RS Logix 500 10 point Micrologix working copy offline version programming software.
If you are a service technician, maintenance engineer, AutoCAD draftsman, this material will help you understand PLC engineering details in an easy to follow DVD. This is a must for managers who manage technical personel.
It includes all calculations required, and excellent pictures and examples. Anyone who is an engineer, electrician, mechanical, chemical, civil, electrical, or electronic engineer will find this a valuable training tool to add to his or her library.
If you want a better understanding on PLC's this series of courses is perfect for you. Applicable to circuit breaker users, relay calibration departments, switchgear designers, MCC designers, generator manufacturers, any engineering discipline, or maintenance engineer.
Enjoy! This is some really good material.
1) Do I need to understand how a computer works? Yes, you need to be computer literate, this course is not easy and it is designed for an engineering student in their first or second year of college completed.
2) I went to a technical school, is this ok for me to take? Absolutely; the technical schools just skip the basic courses and cut to the chase and skip some of the theory and teach what is needed. If you have a technical background, or similar military experience, and or work experience you will do fine with this material.
3) What type of software is on these disks? This program focuses on PLC training, it is illegal to pass on a full blown version of RS Logix 5000 and this course does not offer that; and neither does the AB Basic RS logix 5000 PLC training course. We do offer some similation software, and a free 90 day version of AB RS Logix 5000 offline program that can be used to practice with, but not actually download a PLC, you cannot go online with it. You can download this version from the AB website.
4) What type of computer do I need? Typically Windows XP (service pack 1 installed) is all that is required. A pentium II will run the software. The DVD's run best in a regular TV DVD player. (Windows NT, 2000, work as well)
5) How long does it take to complete? Give yourself at least 20-30 days to complete the entire program, PLC Course #1, 2 and 3. Watch the PLC #1 DVD first then do all of the homework, then go to the next DVD; do not skip and do all of the homework before proceeding to the next DVD.
These are some emails we recieved on the PLC training courses for RS Logix 500.
Item: PLC Training RS Logix 500 #1 #2 & #3 AB RSLogix (330104530101)
This message was sent after the listing closed.
I have been watching this on my lap top with no problems, dude, this is good stuff. Great job! I like the way you start with the basics as if I had no knowledge of plc's. This is really a great tool. I will use it to teach my son as well. Thanks again.
Item: Engineering PLC #1 RS Logix 500 Allen Bradley RSLOGIX (330108590718)
This message was sent while the listing was active.
Do you have ENGINEERING PLC #4 #5 #6 #7 AND #8
