Oak Bluffs, MA old classifieds archive and funnies > By Year
> 2006
> Mycom UPS52 motion controller working w. warranty
Mycom UPS52 motion controller working w. warranty
Very High Torque in a compact package
Up to 2000 Steps per Revolution
Virtually No low speed resonance
Extremely high speed performance
Output Current: 1.4A/phase Max.
Driver Type: Star Bi-Polar, Constant Current Chopper
Power Requirements: 85 ~ 132 VAC , 50/60Hz
Power Consumption: 4.0A or less
Built in Functions: Auto Current Down at stand still. Current OFF. Monitor Timing Output signal. Input Pulse Type: Step & Direction or Bi-Clock (CW/CCCW) pulses (Selectable). All Opto-Isolated . Voltage H=4.5 to 5V , L = 0 to 0.5V , Resistance = 330 ohms.
Dielectric Strength: No abnormality detected after the application of AC 1 KV between case and power input terminals, case and signal I/O terminals, signal I/O terminals and power input terminals for duration of one minute.
Insulation Resistance: 100 M ohms or better with 500V potential applied between case and power input terminals and signal I/ O terminals.
Operating Environment Temperature: 0°C to +40°C
We will do our best to answer them INTELLIGENTLY and in a TIMELY manner. Thanks!
and other Important Information, please visit the
approx. 10 lbs with packaging
We are committed to 100% recycling and minimizing our waste. We use 99% recycled or previously used packaging products and try to minimize our environmental impact. Please reduce, re-use and recycle and save our planet for future generations.