Oak Bluffs, MA old classifieds archive and funnies > By Year
> 2007
> Nts 1000A phase noise analyzer/ low noise downconverter
Nts 1000A phase noise analyzer/ low noise downconverter
RDL Model NTS1000A Phase Noise Analyzer with DCR-2500 Downconverter
Proven Measurement Technique
The NTS-1000A Phase Noise Analyzer uses the proven “delay-line discriminator†measurement technique to accurately measure Phase Noise at offsets between 10 Hz and 1 GHz. The NTS-1000A performs a precise calibration at the measured frequency before every measurement to insure measurement accuracy.
The RDL Model NTS-1000A Phase Noise Analyzer is a unique instrument that, for the first time, allows phase noise testing of every part. An FFT digital signal processor and vibration-hardened delay line are contained inside the unit. No external signal generator or outside computer are required.
Measurements are made by simply pushing the “start measurement†button or sending an IEEE bus command. No special training or skills are required to operate the RDL Model NTS-1000A. Phase locking is not required. Automatic “pass/fail†analysis of phase noise levels and spurious levels is provided. These levels are user defined and the results can be reported over the IEEE-488 bus. Fast Measurements
The “measurement range†and “number of FFT averages†are selectable by the user to optimize measurement time. The NTS- 1000A only measures in the selected range to minimize the measurement time. In production applications, where extremely fast measurements are needed, the NTS-1000A can measure and report the results in less than 2 seconds. Typical measurement time for a full range measurement, 10 Hz to 1 GHz, with 100 FFT averages, is only 30 seconds, including an automatic calibration.
Includes Model DCR-2500 Downconverter which enable you to expand measure above 1GHz.
