Oak Bluffs, MA old classifieds archive and funnies > Consumer Grade
> 4.2A, 50V microstepping stepper driver ideal for cnc
4.2A, 50V microstepping stepper driver ideal for cnc
* Low cost , good high-speed torque
* Supply voltage up to +50VDC, current output up to 4.2A
* Optically isolated input signals, pulse frequency up to 400 KHz
* Automatic idle-current reduction
* State current control for less motor heating
* 15 selectable resolutions in decimal and binary
* Suitable for 4,6,8 lead motors
* Stepping on upward or downward pulse edge (selectable)
* DIP switch current setting with 8 different value
* CW/CCW mode available (optional)
* Over-voltage and short-circuit protection
* Small size (118x75.5x33mm)
MSD542 is a low cost high performance bipolar microstepping driver based on most advanced technology. It is suitable for driving any 2-phase and 4-phase hybrid step motors. By using advanced bipolar constant-current chopping technique, it can output more speed and power from the same motor, compared with traditional technologies such as L/R drivers. Its 3-state current control technology allows coil currents to be well controlled, with relatively small current ripple and therefore less motor heating.
For more information, please visit this products webpage.
Delivery to Belgium, France, Germany, Luxembourg, Netherlands and Republic of Ireland is £22.00 (up 30 KG).
Follow this link for delivery charges to Europe
11-15 FRANCIS AVENUE, WALLISDOWN, BOURNEMOUTH BH11 8NX, ENGLAND
Tel: +44 (0) 1202 599922 Fax: +44 (0) 1202 599955
http://www.motioncontrolproducts.co.uk/pdf/MSD542%20datasheet.pdf
