Oak Bluffs, MA old classifieds archive and funnies > Farm Implements
> Mycom UPS52-131 stepper motor controller
Mycom UPS52-131 stepper motor controller
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from Mycom and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
The unit was removed from service in working condition. We are unable to formally test this item. The some of the contact screws heads are stripped.
The Unit's Serial Number Tag Reads:
* Very High Torque in a compact package
* Up to 2000 Steps per Revolution
* Virtually No low speed resonance
* Extremely high speed performance
Output Current: 1.4A/phase Max.
Driver Type: Star Bi-Polar, Constant Current Chopper
Power Requirements: 85 ~ 132 VAC , 50/60Hz
Power Consumption: 4.0A or less
Built in Functions: Auto Current Down at stand still. Current OFF. Monitor Timing Output signal. Input Pulse Type: Step & Direction or Bi-Clock (CW/CCCW) pulses (Selectable). All Opto-Isolated . Voltage H=4.5 to 5V , L = 0 to 0.5V , Resistance = 330 ohms.
Dielectric Strength: No abnormality detected after the application of AC 1 KV between case and power input terminals, case and signal I/O terminals, signal I/O terminals and power input terminals for duration of one minute.
Insulation Resistance: 100 M ohms or better with 500V potential applied between case and power input terminals and signal I/ O terminals.
Operating Environment Temperature: 0°C to +40°C
For More Pictures Please Click the Following:
* Picture 2 - Front View, Up-Close
* Picture 3 - Serial Number Tag
