Oak Bluffs, MA old classifieds archive and funnies > Funny Listings
> Very Funny
> Banner photoelectric sensors SP100FF micro amp
Banner photoelectric sensors SP100FF micro amp
Optical design ensures an exact range limit, regardless of the
surface reflectivity of the objects to be sensed
Powerful infrared light source and modulated amplification provide
reliable sensing of objects with low surface reflectivity
Sensor response to background objects is completely suppressed
Miniature size fits easily into tight areas of machines
Works with special versions of Banner's MICRO-AMP
is a modified version of standard model
MPC3 (product data sheet P/N 03336). The MPC3A is configured for
use with sensor model SP100FF.
Model MPC3A is a miniature "component" amplifier that is designed
dc, and outputs are conventional buffered (complementary) CMOS
Specifications for model MPC3A (except for response time and hookup
information) are identical to standard model MPC3. MPC3A response
time is less than 1.5 milliseconds, and may be adjusted for faster response.
See Banner product data sheet P/N 03336 for complete information.
+10 to 30V dc at less than 20mA;
10% maximum ripple. Power may be obtained from Banner power
supply model MPS-15, CP12C, CP12RC, or PS120-15.
two open-collector NPN (current sinking)
transistor solid-state switches, one normally open, one normally closed.
Specifications, MICRO-AMP MA3A Amplifier
.15 to .25 inch (3,8 to 6,4 mm), .20 inch (5,1 mm) nominal referenced
.08 to .16 inch (2 to 4 mm), .12 inch (3 mm) nominal referenced from
a function of the amplifier (see below)
totally encapsulated, glass lenses. Black Delrin® housing; NEMA 1, 3, 4,
supplied with 6 feet of 4-conductor PVC-covered cable.
