Oak Bluffs, MA old classifieds archive and funnies > Household Goods
> Tektronix SCD5000 transient digitizer opt: 01 1P
Tektronix SCD5000 transient digitizer opt: 01 1P
MODEL: SCD5000 (PLEASE NOT CONDITION)
Opt 01 - Add delay line with Internal trigger pickoff
Opt. 1P - Increase waveform capture rate from one to ten 512-point waveforms per second.
USED, REMOVED FROM CORPORATE MFG FACILITY.
POWERS UP, WE WERE UNABLE TO LIGHT THE DISPLAY UP, NOT SURE WHAT CAUSES THIS.
COMES AS PICTURED, INCLUDES ORIGINAL PROGRAMMER AND USER MANUALS ETC.
SCD SERIES TRANSIENT WAVEFORM RECORDERS
* High single-shot sample rate to 200 GS/s
* Input sensitivity flexibility with SCD1000
* Time resolution to 5 ps per point
* Variable record length from 256 to 1024 points
* Display unit for easy control, viewing, and measurements
The SCD5000 and SCD1000 are designed to capture low nanosecond and picosecond single-shot events. Whether the application involves Laser, ESD, EMP, Accelerators or other high-speed single-shot phenomena, the SCD series waveform recorders can capture the event with excellent fidelity.
The maximum acquisition rate of 200 GS/s provides time resolution to 5 ps. With time windows from 5 ns to 100 µs, the SCD series recorders provide flexible acquisition windows. When the delay line is used, approximately 2.5 ns of pretrigger information can be captured.
The SCD5000 uses direct access with input sensitivity of 5 V and offset of ±4.0 V. The SCD1000 provides quality conditioning of the input signal with 100 mV to 10 V full scale ranges, dc offset and ac or dc coupling. There are two input channels which can be configured to multiplex two signals or algebraically add or subtract two input signals to the single channel waveform recorder.
The waveform record length is selectable between 256, 512 or 1024 data points. With 16 built-in waveform locations, multiple trigger events can be stored into separate storage locations. Each record is time and date stamped for later comparison. There are 10 nonvolatile settings storage locations for quick instrument setup.
The SCD Series recorders are designed for use in either a stand-alone or a system environment. With the standard display unit, SCD waveform recorders allow full control of operation, viewing of up to 4 waveforms and cursor measurements.
In a system environment, there is a high-speed GPIB interface and commands to make data acquisition flexible and fast.
A fast waveform capture option (Opt, 1 P) increases the capture rate by ten times, from one waveform per second to ten waveforms per second.
There is a choice of input connectors in addition to the the standard Type-N connector. On the SCD1000, a choice of SMA or Tek Type II intelligent probe interface are available. On the SCD5000, SMA connectors can be chosen.
The characteristics are divided into 3 parts:
• Vertical characteristics for all SCD series recorders
• Trigger characteristics for all SCD series recorders
• SCD series common characteristics
we reserve the right to re-list the item if not paid after 7 days.
IF YOU ARE IN ALASKA OR HAWAII PLEASE BE PREPARED TO PAY A SLIGHTLY
Seller is not responsible for uninsured items.
Texas residents add 8.25% Sales Tax. This Item is represented as accurately as possible.
